SMT in Line
www.smtinline.com
| Home Page | SMT | Membership | New Products | Secondhand | Human Resource | Search |

FUJI CP-732E High-Speed Chip Placer

CP-732E

 
0.068 sec./shot to within ± 0.066 mm (3 σ), Lightening-strike speed and accuracy. Accelerated loading at 0.6 sec./PCB
 
0.068 sec./shot Ultrahigh-speed Mounting

With the head start given us by the CP-6-series machines, Fuji has pused high-speed mounting to a new level with the CP-732E placing rate of 0.068 sec./chip.

Heads
 
Down Sizing
The only thing the CP-732E didn't inherit from the CP-6-series was its size. The rotary turret and device tables have been shrunk, resulting in a machine 44% the length of the CP-643E, and a 60% footprint reduction.
Touch Screen
The machine is equipped with Fuji's new Windows driven touch screen interface. Tracking advantage of Windows simplicity, operators will benefit from this easier to use system.
 
 
Unbeatable 0.6 sec./PCB Loading

The carrier loader system introduced with the CP-643E has been refined to further benefit users with a loading speed of 1.2 sec./PCB, or 0.6 sec./PCB with double loading.

PCB loading
Batch feeder Exchange

By employing a batch changeover system, users can substantially cut associated downtime. A feeder set is loaded onto the machine in one go with the pallet device table system. A special loading trolley called the PCU (pallet change unit) allows any operator to easily load a feeder set quickly and smoothly.

Batch Feeder
Specifications
Model CP-732E
PCB dimensions 50 mm (L) x 50 mm (W) ~ 356 mm(L) x 254 mm (W)
Thickness 0.3mm ~ 4.0mm (Option required for handling of PCBs of less than 0.5mm
Component capacity Up to 60 types (30 x 2) (8 mm tape)
Placing rate
    0.068 sec./component under the following conditions.
  1. XY-table movement within 14.2 mm
  2. No component supply table movement
  3. No limitation on component rotation
  4. 100% cam speed
  5. Nozzle indexing up to two pitches
PCB loading time 0.6 sec./PCB with double PCB loading.
1.2 sec./PCB with single PCB loading.
Loading time does not include XY-table movement.
Double PCB loading is possible for PCBs up to 170 mm in length.
Fiducial mark reading time Approx. 0.25 sec./mark. Obtained when reading a 1.2 mm diameter mark, excluding travel between marks, and adjustments for mark shape varietions and location errors.
Placing accuracy
(fiducial mark referencing)		 ± 0.066 mm (3 σ) and ± 0.132 mm (6 σ) in the X- and Y-directions.
Applicable components 0603 (in. 0201) to 19 x 19 mm (CSPs to be supported) height up to 6 mm
Packaging 8, 12, 16, 24 mm tape, 180, 330 380 mm reel diameters/1005C (in. 0902) and 1608C (in. 0603) bulk case support( under development)
Power 3-phase, 200 to 480 VAC, 10 KVA
Air supply 0.5 MPa (5 kgf/cm2), 46 Nl/min
Machine dimensions 2134 mm (L) x 1723 mm (W) x 1653 mm (H) (2903mm W with PCU connected)
Weight Approx. 3900 kg
Information & Suggestions: webmaster@smtinline.com
© 2000 smtinline. All rights reserved.