SMT in Line
www.smtinline.com

DEK 265 Horizon

Screen Frames
Type	External (w x l x t)	Internal (w x l)
Standard DEK 265	736 x 736 x 38/40mm (29" x 29")	660 x 660mm (26" x 26")
Options* DEK 260	585 x 585mm 508 x 508mm (20" x 20")	508 x 508mm (20" x 20")
All common stencil sizes available: Sanyo, Ekra, Fuji, Panasonic, MPM etc.
Image to Stencil Position	Centre, Front, Custom.

Board Handling

Minimum: Size 40 x 50 mm.
Maximum: Size 510 x 508mm* (620 x 508mm).
Thickness: 0.2 - 6mm.
Warpage: Up to 8mm including PCB thickness.
Underside Component Clearance: Programmable 3- 42mm.
Transport Conveyors: Programmable motorized.
Transport Direction: Left to Right / Right to Left / Left to Left / Right to Right.
Interface Protocols: All popular interfaces available.
Board Location: Patented Over the Top clamps / Edge clamping* / Vacuum*. Foil-less clamps with Vacuum*.
Registration: Fully automatic Vision.

Process Parameters

Print Speed: 2 - 150 mm/sec.

Print Pressure: 0 - 20kg Software programmable (*closed loop feed back).

Print Gap: 0 - 6mm.

Stencil Separation Speed: 0.1 - 20mm/sec.

Distance: 0 - 3mm.

Print Modes: ProFlow®* / Print Print / Print Flood / Flood Print / Adhesive.

Paste Knead Programmable: Number, Period, On demand.

Vision

Vision System: Cognex 8100 vision system.

Camera Lighting: Software controlled programmable lighting, vertical and oblique.

Fiducials: 2 or 3.

Fiducial Types: Synthetic fiducial library or unique pattern recognition.

Fiducial Size: 0.5 - 3 mm.

Fiducial Position: Anywhere on PCB.

Fiducial Error Recovery: Auto lighting adjustment / Auto fiducial search / Smart fiducial.

Performance

Alignment Stencil to board repeatability, 1.6 Cpk @ ¡À 25¦m.

Cycle Time 12.5 secs (10 secs)*.

Product Changeover 2 minutes #.

New Product Set-Up <10 minutes.

Operator Interface

Hardware: Colour VGA Touch screen display, keyboard and mouse.

Software: Microsoft® NT Windows.

Manuals: Electronic on board manuals: Operator / Maintenance. Viewed via multi-tasking Windows® interface. Hard copies available*.

Options

ProFlow®: Fully enclosed, high speed DirEKt Imaging system / Integrated Thermal Control system (ITC).

Inspection: Full inspection capability of board and stencil: Volume prediction / Alignment X,Y (with automatic feedback), Bridging, Blockage, Smearing, Percentage paste coverage of pad, Automatically triggered recovery sequences: Inspection outputs available to Statistical Control software.

Tooling Form: Flex, AutoFlex programmable tooling. (35 mm pitch) MultiFlex with or without vacuum.

Dedicated vacuum plates.

Screen Cleaner: Fully programmable wet, dry and vacuum assisted, Underscreen cleaner. Paper or Vortex (foam).

Paste Dispenser: Fully programmable automatic paste dispensing system. Available for 1kg and 500g cartridges.

Temperature and Humidity Sensor: Sensor to measure and display temperature and humidity within the printing area. SPC output available.

Environmental Control Units: Temperature control unit: Controls the temperature of the printing area.

Temperature and humidity control unit: Controls the temperature and humidity of the printing area.

Statistical Process Control: Package On board package to collect, manage and display critical process and maintenance parameters.

Off Line Editor: Off Line software package to generate and edit product files. Available on board or via network.

Network LAN package: to transfer data within factory network. Package includes DEK netfile software,

which target product and SPC files to location on the network.

GEM: GEM available via TCPIP.

Remote Monitoring Software package: to monitor and display machine(s) status remotely via a network and to display MTBF and productivity data.

Approval

CE: EC Certificate of Conformity (Safety and EMC) UL or equivalent.

Services

Power Supply 110,120,200,220,230,240 volt 50/60Hz / 100 V 24 Amps / 240 V 10 Amps.

Air Supply Clean dry air 4-8 bar (60-120 psi) / 5 litres/min.

Shipping Information

Approx. Weight 800kg (1760lbs.)

Approx. Dimensions 1314 x 1325 x 1592mm (51.7 x 52.1 x 62.6 in).

*Options # Timed using Automatic Programmable tooling option

Information & Suggestions: webmaster@smtinline.com

SMT in Line www.smtinline.com

SMT in Line
www.smtinline.com