| Equipment |
Model |
9800 |
|
|
| General |
Length (inches) |
60
|
|
|
| Width (inches) |
39 |
|
|
| Height (inches) |
60 |
|
|
| Automation |
Fully automatic |
|
|
| Board Handling |
Maximum size (inches) |
22x20 |
|
|
| Minimum size (inches) |
1x1 |
|
|
| Maximum thickness (") |
0.75 |
|
|
| Minimum thickness (") |
0.031 |
|
|
| Maximum warpage (") |
<1.25 |
|
|
| Underside component clearance
(inches) |
1 |
|
|
| Board held by |
Edge clamp, vacuum,
other |
|
|
| Board support |
Magnetic pins,
vacuum plate, other |
|
|
| Conveyor |
Standard |
|
|
| Board Movement |
R to L, L to
R |
|
|
| Dual-lane board handling? |
No |
|
|
| Print Head |
Print area (inches) |
22.5x20 |
|
|
| Maximum print stroke(") |
22.5 |
|
|
| Mdthod of registration |
Vision, Two-camera
vision |
|
|
| Optical alignment? |
Yes |
|
|
| Alignment accuracy (microns) |
12.5 |
|
|
| Alignment repeatability (microns) |
12.5 |
|
|
| Print Modes |
Print/print,
print/flood, flood/print, on contact, 1 or 2 deposits |
|
|
| Print speed (inches/second) |
0-10 |
|
|
| Print pressure (pounds) |
0 to 66 |
|
|
| Snap off (print gap) (inches) |
0-0.1 |
|
|
| Is snap-off programmable? |
Yes |
|
|
| Cycle time (seconds) |
Single lane:
<20 |
|
|
| Stencil |
Frame size (inches) |
29x29 |
|
|
| PCB stencil seperation speed
(inches/second) |
0.01 to 2
|
|
|
| Stencil cleaning |
Dry, wet, vacuum |
|
|
| Programmable? |
Yes |
|
|
| Stencil Wiper |
Optional |
|
|
| Squeegee |
Squeegees |
Metal, polyurethane |
|
|
| Squeegee pressure (pounds) |
26 to 92 |
|
|
| Where measured? |
Closed-loop pressure
circuit |
|
|
| Horizontal or central pivot? |
Central |
|
|
| Vision system |
Type |
On the move,
look up, look down |
|
|
| Field of vision (inches) |
0.5x0.375 |
|
|
| SMEMA fiducial standard compatible? |
Yes |
|
|
| Align calibration |
Fully automatic |
|
|
| Post-print inspection available? |
No |
|
|
| Program |
Up and down line protocol |
SMEMA |
|
|
| Number of programs stored |
2000+ |
|
|
