| Equipment |
Model |
DEK 265 GSx |
DEK 288 |
|
| General |
Length (inches) |
51.7
|
64.5
|
|
| Width (inches) |
55.3 |
62.2 |
|
| Height (inches) |
57.4 |
66.14 |
|
| Automation |
Fully automatic |
Fully automatic |
|
| Board Handling |
Maximum size (inches) |
20.1x20 |
20x20 |
|
| Minimum size (inches) |
2.8x1.5 |
2x1.5 |
|
| Maximum thickness (") |
0.016 |
2.5 |
|
| Minimum thickness (") |
0.25 |
0.016 |
|
| Maximum warpage (") |
0.28 |
0.31 |
|
| Underside component clearance
(inches) |
0.12 to 1 |
0.125 to 1 |
|
| Board held by |
Edge clamp, vacuum,
other |
Edge clamp, vacuum,
other |
|
| Board support |
Magnetic pins,
tooling pins, vacuum plate |
Magnetic pins,
tooling pins, vacuum plate |
|
| Conveyor |
Standard |
Standard |
|
| Board Movement |
R to L, L to
R |
R to L, L to
R |
|
| Dual-lane board handling? |
Yes |
Yes |
|
| Print Head |
Print area (inches) |
20 x 19.5 |
20 x 20 |
|
| Maximum print stroke(") |
2.2 to 22.3 |
2.2 to 28.8 |
|
| Mdthod of registration |
Vision |
Vision |
|
| Optical alignment? |
Yes |
Yes |
|
| Alignment accuracy (microns) |
±25 |
±25 |
|
| Alignment repeatability (microns) |
25 |
25 |
|
| Print Modes |
Print/print,
print/flood, flood/print, on contact, 1 or 2 deposits |
Print/print,
print/flood, flood/print, on contact, 1 or 2 deposits |
|
| Print speed (inches/second) |
0.08 to 5.9 |
0.08 to 12 |
|
| Print pressure (pounds) |
0 to 44 |
1 to 44 |
|
| Snap off (print gap) (inches) |
0 to 0.24 |
N/A |
|
| Is snap-off programmable? |
Yes |
Yes |
|
| Cycle time (seconds) |
Single lane:
<10 |
Single lane:
5 |
|
| Stencil |
Frame size (inches) |
29x29 |
21.6 to 31.5 |
|
| PCB stencil seperation speed
(inches/second) |
0.04 to 0.79
|
0.004 to 0.8
|
|
| Stencil cleaning |
Dry, wet, vacuum |
Dry, wet, vacuum |
|
| Programmable? |
Yes |
Yes |
|
| Stencil Wiper |
Optional |
Optional |
|
| Squeegee |
Squeegees |
Metal, polyurethane,
other |
Metal, polyurethane,
other |
|
| Squeegee pressure (pounds) |
0 to 44 |
1 to 44 |
|
| Where measured? |
N/A |
N/A |
|
| Horizontal or central pivot? |
Horizontal |
Central |
|
| Vision system |
Type |
On the move |
On the move |
|
| Field of vision (inches) |
0.25x0.31 |
5x8 |
|
| SMEMA fiducial standard compatible? |
Yes |
Yes |
|
| Align calibration |
Full automatic |
Full automatic |
|
| Post-print inspection available? |
2-D |
2-D |
|
| Program |
Up and down line protocol |
SMEMA, SECS,
GEM |
SMEMA, SECS,
GEM |
|
| Number of programs stored |
1000+ |
1000+ |
|
