| Equipment |
Model |
GP-551E |
GP-641E |
|
| General |
Length (inches) |
70.3
|
66.1
|
|
| Width (inches) |
68.9 |
61.2 |
|
| Height (inches) |
61 |
61 |
|
| Automation |
Fully automatic |
Fully automatic |
|
| Board Handling |
Maximum size (inches) |
20x18 |
18x14 |
|
| Minimum size (inches) |
3.15x1.97 |
3.15x1.97 |
|
| Maximum thickness (") |
0.157 |
0.157 |
|
| Minimum thickness (") |
0.031 |
0.031 |
|
| Maximum warpage (") |
0.04 |
0.04 |
|
| Underside component clearance
(inches) |
0.35 to 1 |
0.35 to 1 |
|
| Board held by |
Edge clamp, vacuum
|
Edge clamp, vacuum
|
|
| Board support |
Tooling pins,
vacuum plate, other |
Tooling pins,
vacuum plate, other |
|
| Conveyor |
Standard |
Standard |
|
| Board Movement |
R to L |
L to R |
|
| Dual-lane board handling? |
No |
No |
|
| Print Head |
Print area (inches) |
20 x 18 |
18x14 |
|
| Maximum print stroke(") |
27.5 |
18.8 |
|
| Mdthod of registration |
Vision |
Vision |
|
| Optical alignment? |
Yes |
Yes |
|
| Alignment accuracy (microns) |
±25 |
±25 |
|
| Alignment repeatability (microns) |
±25 |
±25 |
|
| Print Modes |
Print/print,
on contact, 1 or 2 deposits |
Print/print,
on contact, 1 or 2 deposits |
|
| Print speed (inches/second) |
0.039 to 11.81 |
0.039 to 11.81 |
|
| Print pressure (pounds) |
2.2 to 4.4 |
2.2 to 4.4 |
|
| Snap off (print gap) (inches) |
0 |
0 |
|
| Is snap-off programmable? |
Yes |
Yes |
|
| Cycle time (seconds) |
Single lane:
10 |
Single lane:
9.5 |
|
| Stencil |
Frame size (inches) |
35.8x27.16 |
25.59x26.77 |
|
| PCB stencil seperation speed
(inches/second) |
0.004 to 3.15
|
0.004 to 3.15
|
|
| Stencil cleaning |
Dry, wet, other |
Dry, wet, other |
|
| Programmable? |
N/A |
Yes |
|
| Stencil Wiper |
Standard |
Standard |
|
| Squeegee |
Squeegees |
Metal, polyurethane
|
Metal, polyurethane
|
|
| Squeegee pressure (pounds) |
2.2 to 44.1 |
2.2 to 44.1 |
|
| Where measured? |
On print head |
On print head |
|
| Horizontal or central pivot? |
Central |
Central |
|
| Vision system |
Type |
On the move,
look up, look down |
On the move,
look up, look down |
|
| Field of vision (inches) |
0.35x0.35 |
0.35x0.35 |
|
| SMEMA fiducial standard compatible? |
No |
No |
|
| Align calibration |
Full automatic |
Full automatic |
|
| Post-print inspection available? |
No |
No |
|
| Program |
Up and down line protocol |
SMEMA, SECS,
GEM |
SMEMA, SECS,
GEM |
|
| Number of programs stored |
10 |
10 |
|
