| Equipment |
Model |
SPP-V XL |
SP22P-M |
|
| General |
Length (inches) |
71
|
55.1
|
|
| Width (inches) |
70 |
63 |
|
| Height (inches) |
59 |
63 |
|
| Automation |
Fully automatic |
Fully automatic |
|
| Board Handling |
Maximum size (inches) |
18x20 |
10x13 |
|
| Minimum size (inches) |
2x2 |
2x2 |
|
| Maximum thickness (") |
0.16 |
0.12 |
|
| Minimum thickness (") |
0.02 |
0.015 |
|
| Maximum warpage (") |
0.047 |
0.039 |
|
| Underside component clearance
(inches) |
1.18 |
0.94 |
|
| Board held by |
Edge clamp, vacuum,
pin |
Edge clamp |
|
| Board support |
Tooling pins,
vacuum plate |
Tooling pins,
vacuum plate, other |
|
| Conveyor |
Standard |
Standard |
|
| Board Movement |
R to L, L to
R |
L to R |
|
| Dual-lane board handling? |
No |
No |
|
| Print Head |
Print area (inches) |
19x29 |
14.17x13.7 |
|
| Maximum print stroke(") |
29 |
13 |
|
| Mdthod of registration |
Vision |
Vision |
|
| Optical alignment? |
Yes |
Yes |
|
| Alignment accuracy (microns) |
25 |
N/A |
|
| Alignment repeatability (microns) |
8 |
N/A |
|
| Print Modes |
Print/print,
print/flood, flood/print, on contact |
Print/print,
print/flood, flood/print, on contact |
|
| Print speed (inches/second) |
0.04 to 7.9 |
6 |
|
| Print pressure (pounds) |
0 to 43 |
0.011 to 0.055 |
|
| Snap off (print gap) (inches) |
-0.04 to 0.4 |
N/A |
|
| Is snap-off programmable? |
Yes |
No |
|
| Cycle time (seconds) |
Single lane:
16 |
Single lane:
9 |
|
| Stencil |
Frame size (inches) |
39.4x33.5 |
21.65x25.6 |
|
| PCB stencil seperation speed
(inches/second) |
0 to 0.39
|
0.024
|
|
| Stencil cleaning |
Dry, wet, vacuum |
Dry, wet, vacuum |
|
| Programmable? |
Yes |
Yes |
|
| Stencil Wiper |
Standard |
Standard |
|
| Squeegee |
Squeegees |
Metal, polyurethane,
other |
Metal, polyurethane |
|
| Squeegee pressure (pounds) |
0 to 43 |
0.011 to 0.055 |
|
| Where measured? |
At squeegee head |
Air cylinder |
|
| Horizontal or central pivot? |
Both |
Horizontal |
|
| Vision system |
Type |
On the move ,
look down |
Fixed, on the
move, look up, look down |
|
| Field of vision (inches) |
0.120 |
0.2 |
|
| SMEMA fiducial standard compatible? |
Yes |
Yes |
|
| Align calibration |
Full automatic |
Semi-automatic |
|
| Post-print inspection available? |
2-D |
2-D |
|
| Program |
Up and down line protocol |
SMEMA |
SMEMA |
|
| Number of programs stored |
200 |
99 |
|
