| Equipment |
Model |
VMP20AV |
|
|
| General |
Length (inches) |
49
|
|
|
| Width (inches) |
38 |
|
|
| Height (inches) |
39.4 |
|
|
| Automation |
Auto-automatic |
|
|
| Board Handling |
Maximum size (inches) |
17.7x19.7 |
|
|
| Minimum size (inches) |
3x3 |
|
|
| Maximum thickness (") |
0.2 |
|
|
| Minimum thickness (") |
0.008 |
|
|
| Maximum warpage (") |
0.080 |
|
|
| Underside component clearance
(inches) |
0.5 |
|
|
| Board held by |
Vacuum |
|
|
| Board support |
Magnetic pins,
Tooling pins, vacuum plate |
|
|
| Conveyor |
Standard |
|
|
| Board Movement |
L to R |
|
|
| Dual-lane board handling? |
No |
|
|
| Print Head |
Print area (inches) |
15.7x17.7 |
|
|
| Maximum print stroke(") |
15.7 |
|
|
| Mdthod of registration |
Vision |
|
|
| Optical alignment? |
Yes |
|
|
| Alignment accuracy (microns) |
25 |
|
|
| Alignment repeatability (microns) |
25 |
|
|
| Print Modes |
Print/print,
print/flood, flood/print, on contact, 1 or 2 deposits |
|
|
| Print speed (inches/second) |
0.4 to 2.75 |
|
|
| Print pressure (pounds) |
33 |
|
|
| Snap off (print gap) (inches) |
0 to 1.0 |
|
|
| Is snap-off programmable? |
Yes |
|
|
| Cycle time (seconds) |
Single lane:
16 to 18 |
|
|
| Stencil |
Frame size (inches) |
20x20 |
|
|
| PCB stencil seperation speed
(inches/second) |
0.04 to 0.8
|
|
|
| Stencil cleaning |
Dry, wet |
|
|
| Programmable? |
Yes |
|
|
| Stencil Wiper |
Optional |
|
|
| Squeegee |
Squeegees |
Metal, polyurethane |
|
|
| Squeegee pressure (pounds) |
0 to 33 |
|
|
| Where measured? |
Stepper motor
controlled |
|
|
| Horizontal or central pivot? |
Central |
|
|
| Vision system |
Type |
Fixed, look down |
|
|
| Field of vision (inches) |
0.236x0.315 |
|
|
| SMEMA fiducial standard compatible? |
Yes |
|
|
| Align calibration |
Fully automatic |
|
|
| Post-print inspection available? |
No |
|
|
| Program |
Up and down line protocol |
N/A |
|
|
| Number of programs stored |
30 |
|
|
