| Equipment |
Model |
Ultraprint 3000 HiE |
AP HiE
Seires |
Ultraprint 2000 HiE |
| General |
Length (inches) |
63
|
68
|
63
|
| Width (inches) |
63 |
47 |
46 |
| Height (inches) |
60 |
64 |
64 |
| Automation |
Fully automatic |
Fully automatic |
Fully automatic |
| Board Handling |
Maximum size (inches) |
22x20 |
20x16 |
20x16 |
| Minimum size (inches) |
2x1 |
2x2 |
2x2 |
| Maximum thickness (") |
0.5 |
0.5 |
0.5 |
| Minimum thickness (") |
0.015 |
0.015 |
0.015 |
| Maximum warpage (") |
0.0075 |
0.0075 |
0.0075 |
| Underside component clearance
(inches) |
1 |
0.5 |
0.5 |
| Board held by |
Edge clamp, Vacuum
|
Edge clamp, Vacuum
|
Edge clamp, Vacuum
|
| Board support |
Magnetic Blocks,
Tooling pins, vacuum plate |
Magnetic Blocks,
Tooling pins, vacuum plate |
Magnetic Blocks,
Tooling pins, vacuum plate |
| Conveyor |
Standard |
Standard |
Standard |
| Board Movement |
R to L, L to
R |
R to L |
R to L, L to
R |
| Dual-lane board handling? |
No |
No |
No |
| Print Head |
Print area (inches) |
21.76x19.76 |
18x16 |
18x16 |
| Maximum print stroke(") |
30.5 |
16 |
16 |
| Mdthod of registration |
Vision |
Vision |
Vision |
| Optical alignment? |
Yes |
Yes |
Yes |
| Alignment accuracy (microns) |
12.5 |
12.5 |
12.5 |
| Alignment repeatability (microns) |
25 |
25 |
25 |
| Print Modes |
Print/print,
print/flood, flood/print, on contact, 1 or 2 deposits |
Print/print,
print/flood, flood/print, on contact |
Print/print,
print/flood, flood/print, on contact |
| Print speed (inches/second) |
8 |
12 |
12 |
| Print pressure (pounds) |
0.1 to 65 |
1 to 60 |
1 to 60 |
| Snap off (print gap) (inches) |
-0.050 to 1 |
-0.050 to 1 |
-0.050 to 1 |
| Is snap-off programmable? |
Yes |
Yes |
Yes |
| Cycle time (seconds) |
Single lane:
6.5 |
Single lane:
<8 |
Single lane:
<11 |
| Stencil |
Frame size (inches) |
29x29 |
29x29 |
29x29 |
| PCB stencil seperation speed
(inches/second) |
0.03 to 0.3
|
0.03 to 0.3
|
0.03 to 0.3
|
| Stencil cleaning |
Dry, wet, vacuum |
Dry, wet, vacuum |
Dry, wet, vacuum |
| Programmable? |
Yes |
Yes |
Yes |
| Stencil Wiper |
Optional |
Optional |
Optional |
| Squeegee |
Squeegees |
Metal, polyurethane,
rheo pump |
Metal, polyurethane,
rheo pump |
Metal, polyurethane,
rheo pump |
| Squeegee pressure (pounds) |
0 to 60 |
0 to 60 |
0 to 60 |
| Where measured? |
Software 10 x
per second |
Software 10 x
per second |
Software 10 x
per second |
| Horizontal or central pivot? |
Balanced controlled
head |
Balanced controlled
head |
Central |
| Vision system |
Type |
On the move,
look up, look down |
On the move,
look up, look down |
On the move,
look up, look down |
| Field of vision (inches) |
0.400x0.300 |
0.25 |
0.25 |
| SMEMA fiducial standard compatible? |
Yes |
Yes |
Yes |
| Align calibration |
Fully automatic |
Fully automatic |
Fully automatic |
| Post-print inspection available? |
2-D, 3-D |
2-D |
2-D |
| Program |
Up and down line protocol |
SMEMA, SECS,
GEM |
SMEMA, SECS,
GEM |
SMEMA, SECS,
GEM |
| Number of programs stored |
400 |
400 |
400 |
|
