| Equipment |
Model |
SPM Series |
Ultraprint 2500 |
|
| General |
Length (inches) |
72
|
72
|
|
| Width (inches) |
56 |
46 |
|
| Height (inches) |
52 |
64.5 |
|
| Automation |
Semi-automatic |
Fully automatic |
|
| Board Handling |
Maximum size (inches) |
20.5x18.50 |
20x20 |
|
| Minimum size (inches) |
3x2 |
2x2 |
|
| Maximum thickness (") |
0.375 |
0.5 |
|
| Minimum thickness (") |
0.005 |
0.015 |
|
| Maximum warpage (") |
0.0075 |
0.0075 |
|
| Underside component clearance
(inches) |
1 |
0.5 |
|
| Board held by |
Edge clamp, Vacuum,
other |
Edge clamp, Vacuum
|
|
| Board support |
Magnetic Blocks,
Tooling pins, vacuum plate |
Magnetic Blocks,
vacuum plate |
|
| Conveyor |
N/A |
Standard |
|
| Board Movement |
N/A |
R to L, R to
L |
|
| Dual-lane board handling? |
N/A |
Yes |
|
| Print Head |
Print area (inches) |
20x19 |
20x20 |
|
| Maximum print stroke(") |
19 |
24 |
|
| Mdthod of registration |
Two camera vision,
manual |
Vision |
|
| Optical alignment? |
Yes |
Yes |
|
| Alignment accuracy (microns) |
±0.001 |
±12.5 |
|
| Alignment repeatability (microns) |
±0.0005 |
±25 |
|
| Print Modes |
Print/print,
print/flood, flood/print, on contact, 1 or 2 deposits |
Print/print,
print/flood, flood/print, on contact, 1 or 2 deposits |
|
| Print speed (inches/second) |
12 |
12 |
|
| Print pressure (pounds) |
50 |
50 |
|
| Snap off (print gap) (inches) |
0.375 |
0.1 |
|
| Is snap-off programmable? |
Yes |
Yes |
|
| Cycle time (seconds) |
Single lane:
6.5 |
Single lane:
7.5
Dual lane: 7.5 |
|
| Stencil |
Frame size (inches) |
29x29 |
29x35 |
|
| PCB stencil seperation speed
(inches/second) |
Adjustable
|
0.03
|
|
| Stencil cleaning |
Dry, wet |
Dry, wet, vacuum |
|
| Programmable? |
Yes |
Yes |
|
| Stencil Wiper |
Optional |
Optional |
|
| Squeegee |
Squeegees |
Metal, polyurethane |
Metal, polyurethane
|
|
| Squeegee pressure (pounds) |
50 |
50 |
|
| Where measured? |
Center |
Software 10 x
per second |
|
| Horizontal or central pivot? |
Central |
Balanced control
print head |
|
| Vision system |
Type |
Fixed, look down |
On the move,
look up, look down |
|
| Field of vision (inches) |
0.375x0.280 |
0.38x0.30 |
|
| SMEMA fiducial standard compatible? |
Yes |
Yes |
|
| Align calibration |
Semi-automatic |
Fully automatic |
|
| Post-print inspection available? |
No |
2-D, 3-D |
|
| Program |
Up and down line protocol |
N/A |
SMEMA, SECS,
GEM |
|
| Number of programs stored |
200 |
400 |
|
