| Equipment |
Model |
Opti-Print 2436 BAM |
Opti-Print 2430 BAM |
Opti-Print 2020 |
| General |
Length (inches) |
48
|
36
|
36
|
| Width (inches) |
65 |
45 |
36 |
| Height (inches) |
64 |
50 |
54 |
| Automation |
Semi-automatic |
Semi-automatic |
Semi-automatic |
| Board Handling |
Maximum size (inches) |
24x48 |
24x32 |
21x24 |
| Minimum size (inches) |
2x2 |
2x2 |
2x2 |
| Maximum thickness (") |
0.625 |
0.625 |
0.625 |
| Minimum thickness (") |
0.005 |
0.005 |
0.005 |
| Maximum warpage (") |
0.05 |
0.05 |
0.05 |
| Underside component clearance
(inches) |
0.505 |
0.505 |
0.505 |
| Board held by |
Vacuum, Other |
Vacuum, Other |
Vacuum, Other |
| Board support |
Magnetic pins,
tooling pins, vacuum plate |
Magnetic pins,
tooling pins, vacuum plate |
Magnetic pins,
tooling pins, vacuum plate |
| Conveyor |
N/A |
N/A |
N/A |
| Board Movement |
N/A |
N/A |
N/A |
| Dual-lane board handling? |
N/A |
N/A |
N/A |
| Print Head |
Print area (inches) |
24x36 |
24x30 |
21x23 |
| Maximum print stroke(") |
36 |
30 |
23 |
| Mdthod of registration |
Two camera vision,
manual |
Two camera vision,
manual |
Two camera vision,
manual |
| Optical alignment? |
No |
No |
No |
| Alignment accuracy (microns) |
6.25 |
6.25 |
6.25 |
| Alignment repeatability (microns) |
6.25 |
6.25 |
6.25 |
| Print Modes |
Print/print,
print/flood, on contact |
Print/print,
print/flood, on contact |
Print/print,
print/flood, on contact |
| Print speed (inches/second) |
0 to 14 |
0 to 14 |
0 to 14 |
| Print pressure (pounds) |
0 to 100 |
0 to 100 |
0 to 100 |
| Snap off (print gap) (inches) |
1 |
1 |
1 |
| Is snap-off programmable? |
No |
No |
No |
| Cycle time (seconds) |
Single lane:
<45 |
Single lane:
<35 |
Single lane:
<25 |
| Stencil |
Frame size (inches) |
29x44 |
29x38 |
29x36 |
| PCB stencil seperation speed
(inches/second) |
0.4
|
0.4
|
0.4
|
| Stencil cleaning |
Manual |
Manual |
Manual |
| Programmable? |
No |
No |
No |
| Stencil Wiper |
N/A |
N/A |
N/A |
| Squeegee |
Squeegees |
Metal, polyurethane |
Metal, polyurethane |
Metal, polyurethane |
| Squeegee pressure (pounds) |
0 to 100 |
0 to 100 |
0 to 100 |
| Where measured? |
At stencil |
At stencil |
At stencil |
| Horizontal or central pivot? |
Central |
Central |
Central |
| Vision system |
Type |
Look down |
Look down |
Look down |
| Field of vision (inches) |
0.25 to 1 |
0.25 to 1 |
0.25 to 1 |
| SMEMA fiducial standard compatible? |
N/A |
N/A |
N/A |
| Align calibration |
N/A |
N/A |
N/A |
| Post-print inspection available? |
No |
No |
No |
| Program |
Up and down line protocol |
N/A |
N/A |
N/A |
| Number of programs stored |
N/A |
N/A |
N/A |
