| Equipment |
Model |
PrinTEK I - Model 4000(manual) |
PrinTEK I - Model 4000(semi-automatic) |
PrinTEK II |
| General |
Length (inches) |
39
|
48
|
38
|
| Width (inches) |
54 |
54 |
59 |
| Height (inches) |
6 |
14 |
55 |
| Automation |
Manual |
Semi-automatic |
Semi-automatic |
| Board Handling |
Maximum size (inches) |
22x24 |
22x24 |
18x18.5 |
| Minimum size (inches) |
N/A |
N/A |
N/A |
| Maximum thickness (") |
0.5625 |
0.75 |
0.75 |
| Minimum thickness (") |
N/A |
N/A |
N/A |
| Maximum warpage (") |
0.5 |
0.5 |
0.5 |
| Underside component clearance
(inches) |
0.625 |
0.625 |
0.625 |
| Board held by |
Tooling pins |
Vacuum, Tooling
pins |
Vacuum, Tooling
pins |
| Board support |
Magnetic pins,
tooling pins, vacuum plate |
Magnetic pins,
tooling pins, vacuum plate |
Magnetic pins,
tooling pins, vacuum plate |
| Conveyor |
N/A |
N/A |
N/A |
| Board Movement |
N/a |
N/a |
N/a |
| Dual-lane board handling? |
N/A |
N/A |
N/A |
| Print Head |
Print area (inches) |
22x24 |
22x24 |
16x18 |
| Maximum print stroke(") |
25.5 |
22 |
16 |
| Mdthod of registration |
Manual |
Manual |
Two camera vision |
| Optical alignment? |
Yes |
Yes |
Yes |
| Alignment accuracy (microns) |
±20 |
±20 |
±20 |
| Alignment repeatability (microns) |
±20 |
±20 |
±20 |
| Print Modes |
Flood/print,
on contact |
Flood/print,
on contact |
Flood/print,
on contact |
| Print speed (inches/second) |
N/A |
0 to 4 |
0 to 4 |
| Print pressure (pounds) |
N/A |
0 to 80 |
0 to 80 |
| Snap off (print gap) (inches) |
0 to 0.05 |
0 to 0.05 |
0 to 0.05 |
| Is snap-off programmable? |
No |
No |
No |
| Cycle time (seconds) |
Single lane:
15 |
Single lane:
15 |
Single lane:
15 |
| Stencil |
Frame size (inches) |
30x32 |
29x29 |
20x20 |
| PCB stencil seperation speed
(inches/second) |
0.5
|
Manual
|
0.5
|
| Stencil cleaning |
N/A |
Manual |
Manual |
| Programmable? |
No |
No |
No |
| Stencil Wiper |
N/A |
N/A |
N/A |
| Squeegee |
Squeegees |
Metal |
Metal |
Metal |
| Squeegee pressure (pounds) |
N/A |
0 to 80 |
0 to 80 |
| Where measured? |
N/A |
Pressure gauge
on regulator |
Regulator |
| Horizontal or central pivot? |
N/A |
N/A |
N/A |
| Vision system |
Type |
On the move,
look down |
On the move,
look down |
On the move,
look down |
| Field of vision (inches) |
2.125 |
2.125 |
1 |
| SMEMA fiducial standard compatible? |
N/A |
N/A |
Yes |
| Align calibration |
Manual |
Manual |
Manual |
| Post-print inspection available? |
N/A |
N/A |
No |
| Program |
Up and down line protocol |
N/A |
N/A |
N/A |
| Number of programs stored |
N/A |
N/A |
60 |
