YV100-II / TOPAZ

---

High-speed, high-performance and cost effective mounter Multi-head, high-precision, high-speed mounter 8 in-line "piano touch" heads

• Component-friendly soft touch mounting
  Mounts components with a piano touch while performing at high-speed. With the newly-designed 8 in-line heads which do not subject components to any shearing stress, it mounts components smoothly at high speed, with unsurpassed mounting reliability.
  
  
• High-speed mounting at 0.25 sec. per chip
  With 8 in-line heads and multi-view high-speed vision processing, achieves high-speed mounting of 0.25 second per chip under optimal set-up conditions.
  
  
• Compact head for reducing the cycle time
  Compact head can exceedingly save useless actions for picking up and mounting components and achieves the reduced cycle time.
  
  
• Handling of very small ceramic boards
  Can be adapted to handle very small ceramic boards of up to L15mmxW10mm on request.
  

---

Multi-vision recognition

• High-speed vision processing
  This recognition system transports eight picked components over the camera without stopping, performing batch recognition of all components at once using multi-view vision processing, significantly reducing component recognition time.
  
  
• High-accuracy recognition within +-0.1mm/chip
  Ensures a mounting accuracy of +-0.1mm for chips. Handles very small 1005 chips, SOPs and PLCC84 pins. With the single-view camera and the precision-head the mounter is capable of mounting QFPs with a lead pitch of 0.5mm and a total pins of 208.
  
  
• Handling of long connectors as well
  Recognizes all the leads on a connector at once and checks their pitch before mounting.
  
  
• Two multi-view cameras
  Due to the adding of a second multi-view camera, the mounter increased its performance.

---

Handling of many types of components

• Handles 100 kinds of tape max.
  Mounts up to 100 kinds of tape. Use of the YTF100A as well allows handling of up to 100 kinds of tray.
  
  
• High-speed nozzle changing
  High-speed nozzle changing minimizes loss time, enabling substantial gains in mounting speed.
  
  
• Well-established Full Vision Series nozzle
  The use of proven nozzles reflects Yamaha's accumulated experience. The use of only one nozzle to handle a wide variety of components minimizes the number of nozzle changes and so shortens the cycle time.
  

---

Economy coexists with high-speed performance

• Newly-designed high-rigidity frame
  As a result of using the same newly-designed high-rigidity frame as on the YVL88, high-speed performance and economy are combined. This frame, designed for high precision, also facilitates high-speed operation.
  

---