YVL88 II / EMERALD

---

High precision and high flexibilty for various components and PCBs. A high-grade and wide application. Laser/vision recognition, multi-functional electronic parts mounter

• Well established laser recognition system

• A mounting rate of over 99.99% even for type 1005 chip components
  Achieves a mounting rate of over 99.99% for type 1005 chip components which are prone to producing recognition errors. Has an excellent record for mounting.
  
  
• Recognizing 1005-PLCC84 pins using a laser
  The laser recognition system uses a laser alignment module system for recognizing the shadows of chip components with a laser beam. Its mounting accuracy is extremely high, less than +-0.1mm.
  

• Mounting of QFPs with a lead pitch of 0.3mm
  This system consists of a fine pitch CCD camera and a 512x480 pixel, 256 gray scale vision recognition system for mounting QFPs with a lead pitch of +-0.04mm. The high accuracy is due to Yamaha's unique algorithm for detection of all leads.
  
  
• Recognizing 54mm QFPs at high speed
  With a wide range of component recognition and the ability to recognize 54mm QFPs as well as other odd-shaped components at once, recognition time is very short. Moreover, Yamaha's unique algoritm allows high-speed, high-precision mounitng of large-sized components too.
  
  
• Recognizing 100mm connectors
  Using a special additional single-view camera, this mounter is capable of handling 100mm connectors.
  

• Handles BGAs, micro-BGAs, various CSPs and other special connectors
  This reflection lighting unit is included for recognition of components that must be illuminated from behind. Yamaha has a wealth of experience mounting BGAs(recognizing all of balls), special connectors, bonding pads, etc.
  
  
• Handling very long connectors
  Recognizes very long connectors at once, checks all their leads, and mounts them with high precision. (Yamaha is willing to accept custom orders.)
  

• 
  
• Auto nozzle changing increases the ability to handle more types of components
  A wide variety of nozzles and full-servo Z-axis are available for different shapes of component. Special nozzles are also available for odd-shaped components, such as long connectors and special transducers. The nozzles can be combined with the auto nozzle change system to handle a wider variety of components.
  
  
• Handling components 15mm high max.
  Mounts components up to 15mm high while retaining high precision, significantly increasing the number of components that can be handled. (Can be adapted to handle components up to 20mm high on request.)
  
  
• Handling up to 94 kinds of tapes
  Mounts 94 kinds of tapes max. Use of the YTF100A as well makes it possible to mount up to 100 kinds of trays, increasing the generality of application.
  
  
• Handling L457xW407 large PCBs
  In order to increase the generality of application, handles large-sized PCBs up to L457xW407mm. (Can be adapted to handle PCBs up to 600mmxW510mm on request.)
  
  
• Adaptable to many specific requests
  Yamaha has responded to special orders and made the YVL88 capable of handling ceramic boards (L15mmxW10mm min.) and thin type boards (0.4t), and of mounting bare chips and BGAs. Yamaha has also enabled the supply of particular types of component using parts feeders.